One-press gain staging — free, for Windows, macOS and Linux.
Press Capture and play the part. StageThemAll listens to a few seconds of sound, decides whether it is percussive or sustained, and sets one gain so the track reaches the level the next plugin in your chain was made for.
Every StageThemAll on your machine is listed in every window. Set a track's mode from there, capture it, or press Capture all and play the song once: every track stages itself in the same pass.
Each instance measures only its own input, against its own target. Nothing is ever adjusted from another track's level — the list is a remote control, not a mixer.
Installation
StageThemAll ships as VST3, CLAP and (on macOS) Audio Unit.
- Windows 10/11 (64-bit) — run the installer. The plugins go to the
standard folders every DAW scans:
C:\Program Files\Common Files\VST3andC:\Program Files\Common Files\CLAP\StageThemAll. - macOS 10.13 or later (Intel and Apple Silicon) — open the
.dmgand run the installer package. By default it installs for the current user in~/Library/Audio/Plug-Ins/(VST3,CLAP,Components); choose Install for all users of this computer to write to/Library/Audio/Plug-Ins/instead. - Linux (x86-64) — copy
StageThemAll.vst3to~/.vst3andStageThemAll.clapto~/.clap.
Restart your DAW and rescan plugins after installing.
Quick start
- Insert StageThemAll on a track, before the plugin whose input level matters (a compressor, an amp model, an analogue-style emulation).
- Press Capture.
- Play the part — the whole range of what the track really does. The progress bar fills as sound is heard.
- When the bar is full, the staged gain is shown (STAGED −6.2 dB) and the track is at its target. You are done.
To stage the whole session at once, press Capture all in any window, then play the song through once. Every unlocked instance listens at the same time.
How it listens
- StageThemAll measures the RMS level of the track's input, in 10 ms frames.
- Silence does not count. Anything quieter than −70 dBFS is ignored, and the capture clock stops while nothing plays. Gaps longer than 200 ms that sit far below the loudest part (a breath, the end of a phrase) are left out too. A part that plays rarely simply takes longer: keep playing.
- Once it has heard enough sound (Length, 4 s by default), it decides:
- Percussive — drums, plucks, anything made of hits. Staged to the Percussive target.
- Sustained — pads, bass, voices, anything that holds. Staged to the Sustained target.
- It then sets one gain that brings the measured level to that target, never pushing the measured peak above the Peak ceiling. When the ceiling holds the gain back, the panel says so (HELD BACK BY THE PEAK CEILING, and staged (peak held) in the list).
- If the sound sits near the line between percussive and sustained, the panel warns you (close call). Listen, and force the mode if the choice is wrong.
What was measured is stored in the project, along with the previous capture: nothing is re-measured when you reopen a session. The gain itself is worked out again from the measurement and the targets and ceiling you have now, so a project reopened after you moved a target stages to the new target.
Staging a part that plays rarely
If a track has little material — sparse hits, long rests — you do not have to play the whole song. Loop a region where the part plays, press Capture and let the loop run: the clock only advances on sound, so the capture keeps listening to the part as it returns until it has enough. You choose the region; StageThemAll never guesses it.
Controls
| Control | Range | Default | What it does |
|---|---|---|---|
| Trim | −24 – +24 dB | 0 dB | Your own offset on top of the staged gain. Automatable. |
| Sustained | −30 – −6 dB RMS | −18 dB | Target level for sustained sources. −18 is the usual 0 VU of analogue-modelled plugins. |
| Percussive | −40 – −10 dB RMS | −25 dB | Target level for percussive sources. Lower than sustained: hits need headroom for their peaks. |
| Ceiling | −12 – 0 dBFS | −1 dBFS | A capture never sets a gain that puts the measured peak above this. |
| Length | 1 – 10 s | 4 s | Seconds of sound to listen to. Silence pauses the clock. |
The staged gain itself is not a host parameter: it comes from the measurement the plugin saves with the project. Use Trim for anything you want to automate.
The track panel
- Mode — Auto decides from what it hears; Percussive and Sustained force the choice.
- Capture — starts listening. Press again while it listens to cancel.
- Revert — back to the gain you had before the last capture (or to none, after the first one). Press again to come back to the capture.
- Lock — freezes this track (see below).
- Name — the name shown in every window's list. Double-click a name in the list to rename it: Enter keeps the name, Escape cancels, and an empty name gives you the host's track name back.
- Hints — hover any control and a one-line description appears.
- Resize — drag the bottom-right grip. The window keeps its aspect ratio and the size is saved with the project. (On Windows, the grip is inactive under Cubase and Nuendo; use the host's own window controls there.)
The list (every instance on this machine)
Each row shows a track's name, mode, state (listening, staged, staged (peak held)), its staged gain, and buttons to Capture (or Cancel) and Lock that track from any window.
| Button | What it does |
|---|---|
| Capture all | Every unlocked StageThemAll listens at once. Then play the song. |
| Cancel all | Cancels every capture still listening. |
| Revert all / Redo all | Every unlocked track staged by the last Capture all goes back to its previous gain; press again (Redo all) to bring the captures back. Locked tracks keep theirs. |
| Lock all / Unlock all | Locks or unlocks every track on this machine in one click. |
Lock
A locked track is finished: its capture, its mode and its Revert stop, and Capture all and Revert all skip it. Use it for the tracks you have already staged by ear. Renaming and Cancel still work.
Trim, the targets and the ceiling still apply on a locked track, and the lock is saved with the project: it is still locked when you reopen the session.
Tips
- Stage before the plugin that cares. Gain staging matters for plugins that react to their input level. Put StageThemAll first on the chain.
- Capture the real part. Play the loudest passage and the quietest, not one note. The measurement is only as good as what it hears.
- Mixed material? Force the mode: Percussive for loops dominated by hits, Sustained for pads and bass.
- Lock what you like. After staging, press Lock all, then unlock the one track you want to redo.
- A hot target on purpose? Raise the targets or use Trim; the ceiling still protects the peak.
Good to know
- The list only sees instances your host runs together. Some hosts load each plugin in its own protected process; there, Capture all cannot reach the other tracks and the panel says so. Capturing the current track still works.
- Up to 64 instances appear in the list at once.
- Automation can move the knobs of a locked track. The lock stops capture, mode and revert; the five parameters follow the host.
- StageThemAll adds no latency and changes only the level of the track: no filtering, no dynamics.
Support
Visit https://xeni-audio.com or contact support@xeni-audio.com.
StageThemAll is free. If it earns a place in your sessions, the rest of the Xeni-Audio range is one click away.
Something unclear, or missing from this manual? Write to support@xeni-audio.com.